IDM TOOL KIT
Back to Tools


 
 
 


Introduction:
The inductive distance measurement tool is a device, which measures the distance or change of any distances contact less on any running equipment. It measures distances in vertical direction to any metal surface with a high accuracy, which replaces basically the traditional dial indicator and allows to measure on not cleaned surfaces during operation.

Measuring Principle:
Inductive sensors use the physical effect of the change of quality of a resonance circuit, which is caused by eddy current losses in leading materials. A LC-resonant circuit produces a high frequency alternating field. This field withdraws at the active surface of the sensor. If an electrically conductive material arrives into the field, then eddy currents occur according the induction law which extract energy from the resonant circuit. The peak-to-peak swing becomes smaller. This change is converted into a switching signal. From the operational principle it follows that all metals are seized - independently of whether they move or not.










 
SEARCH
 
Countdown to IKD University:
 
 


 
 
IKD Blog
 
 
Southeast District
Eastern District
Southern Plains District
 
 
INDUSTRIAL KILN & DRYER GROUP
 
12711 Townepark Way
Louisville, Kentucky 40243
Toll Free: 877-316-6140
Local: 502-244-4031
Fax: 502-244-4024

Follow us on social media:

               

COMPANY OVERVIEW | PARTS | NEW EQUIPMENT | FIELD SERVICE | QUOTE REQUEST | TECHNICAL REFERENCES | ASK THE EXPERTS | INTRANET